Solution towel, bathrobe absorbent washing method. The details are as follows:
1. Solve yellowing phenomenon. When washing at high temperature (65-72℃), only put a small amount of laundry detergent (300g of laundry detergent for 100kg of installed capacity), and then put a small amount of bleach (150g) in the state of washing. In this way, the silver brightening agent can be removed from the towel, and the towel and bathrobe can turn white without yellowing, except the oil stains.
2. solve the problem of water absorption. In the first washing, only put a small amount of laundry detergent (100kg of installed capacity, put 300g of laundry detergent), and wash at high temperature (80-90℃). In this way, the softener on the surface of the towel and bathrobe (which must be cotton products) can be returned, without putting other reagents for washing. After washing, the water absorption of the towel and bathrobe will be improved.
The above two phenomena are also suitable for cotton bed sheet, quilt cover, pillowcase products. The washing temperature of polyester-cotton products should be reduced appropriately.
Solution to towel pilling:
1, the towel in the water washing, the water temperature should not be too high, should be below 40℃, because the water temperature is too high when the cross section of the cotton fiber expansion, the short fiber in the cotton fiber soon free out, the short fiber knot together to form a small ball attached to the surface of the towel.
2. Pay attention to PH control when washing towels, and alkaline can not be too strong. Some detergent with strong detergents are often strong alkaline products, which damage the cotton fibers of the towel and also cause pilling of cotton fibers.
3. Pay attention to the washing capacity of the product when washing the towel, not too small, otherwise the friction force increases when washing the towel, so that the cotton fiber on the surface of the towel is separated from the formation of small wool ball.